Bug-o-systems Programmable Shape Machine Manual de usuario descargar pdf (Pagina 16)

To program a complete new shape (press “A”).

Count the number of segments or operations and enter the total.

For each segment, ENTER

Type: select from 1 through 8

Quadrant: 1, 2, 3 or 4; refer to chart

Size: one or more dimensions per segment as described below; 100 per inch or 10 per mm

(depending on machine version ); or for time, 100 per second of delay.

Eg. 150 = 1.5", or for metric 375 = 37.5 mm.

Detailed description of Types:

Type 1. 

Arc Segments):

Quadrant determined by which quarter of a full circle makes the arc. (See Chart #1).

Dimensions required: Radius only (See Chart #2).



Arc Segments):

Quadrant determined by which quarter of a full circle makes the arc. (See Chart #1).

Dimensions required: Radius only (See Chart #2).

Type 3. Line Along X or Y Axis:

Quadrant determined by direction of movement. (See Chart #1)

(East: 1, North: 2, West: 3, South: 4)

Dimensions required: Length only (See Chart #2).

Type 4. Angled Straight Line:

Quadrant determined by direction of movement. (See Chart #1)

(NE: 1, NW: 2, SW: 3, SE: 4).

Dimensions required: (1) X-dimension; movement along X axis.

(2) Y-dimension; movement along Y axis.

Type 5. Functions:

Quadrant determined by selecting function. (See Chart #1)

1. Weld/Oxygen ON

Turn ON weld contact relay or cutting oxygen solenoid

Dimensions required: None.

2. Weld/Oxygen OFF

Turn off weld contact relay or cutting oxygen solenoid.

Dimensions required: None.

3. Wait For Start

Machine stops and waits until START/RUN button is pushed again.

Dimensions required: None.

4. Delay

Machine stops and holds position for a programmed time period, up to 99.99 seconds.

Dimensions required: time in .01 second units. (eg. 2.5 seconds = 250)

DATA ENTRY REQUIRED FOR PROGRAMMING

1 2 ... 11 12 13 14 15 16 17 18 19 20 21 ... 30 31

Sin comentarios

Bug-o-systems Programmable Shape Machine Manual de usuario Pagina 16